{"id":1725,"date":"2026-10-18T17:11:13","date_gmt":"2026-10-18T17:11:13","guid":{"rendered":"https:\/\/novamounting.com\/nz\/blog\/best-ground-mount-solar-systems-high-wind-regions\/"},"modified":"2026-10-18T17:17:52","modified_gmt":"2026-10-18T17:17:52","slug":"best-ground-mount-solar-systems-high-wind-regions","status":"publish","type":"post","link":"https:\/\/novamounting.com\/nz\/blog\/best-ground-mount-solar-systems-high-wind-regions\/","title":{"rendered":"Best ground mount solar systems for high wind regions: an installer&#8217;s selection guide"},"content":{"rendered":"\n<p class=\"wp-block-paragraph\">The <strong>best solar ground mount system<\/strong> for a high wind region isn&#8217;t the one with the longest feature list or the lowest price. It&#8217;s the one that can prove, with engineering documentation, that it will stand up to the specific wind and seismic loads of your site. In much of New Zealand, where exposed coastal wind meets active seismic ground, that distinction is the difference between a 25-year asset and a warranty claim. This guide gives you the objective criteria to score any ground mount system against before you quote a high-wind project.<\/p>\n\n\n\n<figure class=\"wp-block-image size-large\"><img decoding=\"async\" src=\"https:\/\/novamounting.com\/au\/wp-content\/uploads\/sites\/3\/2026\/10\/Best-ground-mount-solar-systems-for-high-wind-regions-an-installers-selection-guide-1024x492.png\" alt=\"\"\/><\/figure>\n\n\n\n<p class=\"wp-block-paragraph\">Rather than ranking brands, we&#8217;ll walk through what actually makes a system wind-ready in New Zealand conditions: the certification it must carry, the structural and material specifications that matter, the foundation and tilt choices that reduce load, and the questions to ask any supplier before you commit. Score a system against these and you&#8217;ll know whether it belongs on an exposed New Zealand site, whatever the badge on it.<\/p>\n\n\n\n<h2 class=\"wp-block-heading\"><strong>Key takeaway<\/strong><\/h2>\n\n\n\n<ul class=\"wp-block-list\">\n<li>The best ground mount system for high wind is the one certified for your specific wind zone under AS\/NZS 1170.2 and designed for seismic loading under NZS 1170.5, not one with a generic &#8220;wind resistant&#8221; claim.<\/li>\n\n\n\n<li>New Zealand&#8217;s wind zones run from Low through Extra High, and exposed sites around Wellington and Cook Strait are among the windiest in the developed world.<\/li>\n\n\n\n<li>Material and fastener grade matter as much as structure: a system that corrodes loses the strength it needs to resist wind, and most of New Zealand is within reach of coastal salt air.<\/li>\n\n\n\n<li>Foundation flexibility and the right tilt angle are the two levers that reduce the load a system has to resist in the first place.<\/li>\n\n\n\n<li>A wind-ready ground mount system is proven on paper: engineering tables and certification for your site&#8217;s exact wind zone, seismic classification, and terrain.<\/li>\n<\/ul>\n\n\n\n<h2 class=\"wp-block-heading\">W<strong>hy high wind is unforgiving on ground mount systems<\/strong><\/h2>\n\n\n\n<p class=\"wp-block-paragraph\">A ground mount array is a large, flat surface held off the ground, which is to say it&#8217;s a sail. In a high wind event the dominant force isn&#8217;t the wind pushing down, it&#8217;s uplift pulling the array off its foundations, and that uplift can be far greater than the weight the structure was built to carry. In high-wind zones, uplift pressures on tilted panels can be several times the structural dead load, which is why engineering codes require site-specific wind calculations rather than generic values.<\/p>\n\n\n\n<figure class=\"wp-block-image size-large\"><img decoding=\"async\" src=\"https:\/\/novamounting.com\/au\/wp-content\/uploads\/sites\/3\/2026\/10\/Why-high-wind-is-unforgiving-on-ground-mount-systems-1024x517.png\" alt=\"\"\/><\/figure>\n\n\n\n<p class=\"wp-block-paragraph\">New Zealand adds a second problem that most markets don&#8217;t face: seismic loading. The country sits on an active plate boundary, so a ground mount structure has to resist both the wind trying to lift it and the ground trying to shake it apart. Ground shaking works connections loose and stresses the structure in ways wind alone does not. If you want the full picture of where and why systems give way, our guide to <a href=\"https:\/\/novamounting.com\/nz\/blog\/why-ground-mount-solar-systems-fail-high-wind-zones\/\">ground mount solar system failures<\/a> in high wind zones walks through each failure point along the load path.<\/p>\n\n\n\n<h2 class=\"wp-block-heading\"><strong>The six criteria that define a wind-ready ground mount system<\/strong><\/h2>\n\n\n\n<p class=\"wp-block-paragraph\">Score any system against these six criteria before quoting a high-wind project. A system that can&#8217;t satisfy all six isn&#8217;t the best solar ground mount system for the site, whatever its price.<\/p>\n\n\n\n<figure class=\"wp-block-image size-large\"><img decoding=\"async\" src=\"https:\/\/novamounting.com\/au\/wp-content\/uploads\/sites\/3\/2026\/10\/The-six-criteria-that-define-a-wind-ready-ground-mount-system-1024x517.png\" alt=\"\"\/><\/figure>\n\n\n\n<h3 class=\"wp-block-heading\"><strong>1. Certification for your specific wind zone and seismic classification<\/strong><\/h3>\n\n\n\n<p class=\"wp-block-paragraph\">This is the non-negotiable first filter. Every ground mount system in New Zealand must be designed to <a href=\"https:\/\/www.standards.govt.nz\/shop\/asnzs-1170-22021\">AS\/NZS 1170.2<\/a> for wind and <a href=\"https:\/\/codehub.building.govt.nz\/resources\/1170-52004nzs\">NZS 1170.5<\/a> for earthquake actions. Wind zones run from Low through Extra High, and the gap between them is large: a system certified for a sheltered Low zone is not valid on an exposed Very High or Extra High site.<\/p>\n\n\n\n<figure class=\"wp-block-table\"><table class=\"has-fixed-layout\"><tbody><tr><td><strong>Wind zone (AS\/NZS 1170.2)<\/strong><\/td><td><strong>Relative severity<\/strong><\/td><td><strong>What the system must prove<\/strong><\/td><\/tr><tr><td>Low \/ Medium<\/td><td>Lower design wind speed<\/td><td>Standard engineering certification for the zone<\/td><\/tr><tr><td>High<\/td><td>Elevated design wind speed<\/td><td>Zone-specific certification; much of coastal NZ sits here<\/td><\/tr><tr><td>Very High \/ Extra High<\/td><td>Highest design wind speed<\/td><td>Site-specific engineering essential (Wellington, Cook Strait, exposed ridgelines and coast)<\/td><\/tr><\/tbody><\/table><\/figure>\n\n\n\n<p class=\"wp-block-paragraph\">The test for a supplier is simple: can they provide engineering documentation certifying the system for your site&#8217;s exact wind zone, terrain category, and seismic site classification? A generic brochure claim of &#8220;wind rated&#8221; is not certification. Exposed sites and all seismic design require site-specific engineering signed by a registered engineer. If the documentation doesn&#8217;t exist for your site&#8217;s conditions, the system fails the first and most important criterion.<\/p>\n\n\n\n<h3 class=\"wp-block-heading\"><strong>2. Structural material that keeps its strength under load<\/strong><\/h3>\n\n\n\n<p class=\"wp-block-paragraph\">A wind-ready structure needs material that is both strong enough to resist the load and durable enough to keep that strength for 25 years. For ground mount in high-wind conditions, steel is generally preferred because its higher stiffness allows longer spans, which also means fewer posts and lower foundation cost. But raw strength is only half the equation. On coastal New Zealand sites the structure faces a compound challenge: high wind loads and salt-driven corrosion attacking the same steel at the same time. A system that corrodes at the cut edges and connections loses section, and therefore loses the strength it needs to resist wind, years before its design life is up.<\/p>\n\n\n\n<p class=\"wp-block-paragraph\">This is where coating matters as much as the steel itself. Zinc Aluminium Magnesium (ZAM) coated steel offers significantly better corrosion resistance than standard galvanised steel, including at cut edges and perforations where galvanised steel typically fails first. On a coastal New Zealand site, that corrosion resistance is a structural specification, not a nice-to-have, because it protects the strength the structure relies on.<\/p>\n\n\n\n<h3 class=\"wp-block-heading\"><strong>3. Fastener grade matched to the environment<\/strong><\/h3>\n\n\n\n<p class=\"wp-block-paragraph\">Fasteners are the most commonly under-specified part of a high-wind system, and they sit at exactly the points where load concentrates and where seismic movement cycles the structure. The industry benchmark is clear: grade 304 stainless steel is adequate for inland, non-coastal sites, while grade 316 is the minimum for coastal projects. Given how much of New Zealand is coastal, 316 is the safer default on exposed sites. A system using cheaper fasteners to hit a price point is building in a failure point exactly where a high-wind, seismic site can least afford one. Ask any supplier what grade their fasteners are and where they&#8217;re rated to be used.<\/p>\n\n\n\n<h3 class=\"wp-block-heading\"><strong>4. Foundation flexibility to match the site<\/strong><\/h3>\n\n\n\n<p class=\"wp-block-paragraph\">The foundation is where all the wind uplift is ultimately resisted, and the right foundation depends entirely on the site&#8217;s soil. A system that offers both ground screw and concrete ballast foundations as standard lets the installer match the foundation to the ground rather than forcing a compromise at the most critical point in the structure. New Zealand&#8217;s geology varies enormously across short distances, volcanic soils in the central North Island, rocky South Island terrain, and peat in low-lying areas, so foundation flexibility matters more here than in more uniform markets. A ballasted ground mount solar racking approach suits sites where piles can&#8217;t be driven, while ground screws generate uplift resistance by engaging the surrounding soil.<\/p>\n\n\n\n<h3 class=\"wp-block-heading\"><strong>5. The right tilt angle for the wind<\/strong><\/h3>\n\n\n\n<p class=\"wp-block-paragraph\">Tilt angle is a lever that directly changes how much wind load the structure has to resist. A steeper tilt catches more wind and generates more uplift; a lower tilt reduces the load. In a high-wind region, an <strong>adjustable solar ground mount<\/strong> lets the installer dial the tilt down to reduce structural demand, trading a small amount of annual yield for a meaningful reduction in wind load. A <strong>fixed tilt ground mount solar<\/strong> system that offers a usable adjustment range (the Nova Ground Mount System spans 10\u00b0 to 30\u00b0) gives the installer that control, where a single-angle system locks it away.<\/p>\n\n\n\n<h3 class=\"wp-block-heading\"><strong>6. Engineering support behind the product<\/strong><\/h3>\n\n\n\n<p class=\"wp-block-paragraph\">The best solar ground mount system comes with a technical team that can produce the documentation your project needs: wind-zone certification, seismic sign-off, load tables, and foundation specifications. On a high-wind New Zealand project this support is worth more than any saving on hardware, because the certification gap is what gets projects rejected at consent or disputed at insurance. A supplier that can&#8217;t support the paperwork for your wind zone and seismic classification shouldn&#8217;t be on the shortlist.<\/p>\n\n\n\n<p class=\"wp-block-paragraph\"><strong>Nova&#8217;s field notes: we built the Nova Ground Mount System to pass this checklist<\/strong><\/p>\n\n\n\n<p class=\"wp-block-paragraph\">We didn&#8217;t design the Nova Ground Mount System to win on price. We designed it to pass exactly the checklist above. It&#8217;s built from Zinc Aluminium Magnesium coated steel so the structure keeps its strength in the coastal and humid conditions that cover most of New Zealand. It offers both ground screw and concrete ballast foundations as standard, so the foundation can be matched to the site&#8217;s soil and the required uplift resistance. The rear brace support is engineered to transfer wind uplift and overturning loads into the foundations, and the adjustable 10\u00b0 to 30\u00b0 tilt lets installers reduce wind load on exposed sites.<\/p>\n\n\n\n<p class=\"wp-block-paragraph\">Most importantly, our technical team provides the engineering documentation each project needs for its specific wind zone and seismic classification. We&#8217;d rather an installer score our system against the six criteria above and choose it on merit than take a marketing claim on faith. That&#8217;s what &#8220;less is more&#8221; means to us: fewer weak points, proven on paper.<\/p>\n\n\n\n<h2 class=\"wp-block-heading\"><strong>Matching the system to the project<\/strong><\/h2>\n\n\n\n<p class=\"wp-block-paragraph\">The wind zone sets the floor for what a system must prove, but project scale shapes the decision too. A small rural <strong>ground mount racking<\/strong> array in a Low zone and a multi-megawatt commercial project on an exposed coast are both ground mounts, but the second carries far more structural risk simply because there&#8217;s more surface area catching the wind and more connection points to certify. As projects scale up, the certification burden and the cost of getting the specification wrong both grow. Our guide to <a href=\"https:\/\/novamounting.com\/nz\/blog\/large-scale-ground-mount-solar-systems-commercial\/\">commercial ground mount solar systems<\/a> covers how the structural and foundation decisions change as the project gets bigger.<\/p>\n\n\n\n<figure class=\"wp-block-image size-large\"><img decoding=\"async\" src=\"https:\/\/novamounting.com\/au\/wp-content\/uploads\/sites\/3\/2026\/10\/Matching-the-system-to-the-project-1024x517.png\" alt=\"\"\/><\/figure>\n\n\n\n<p class=\"wp-block-paragraph\">The quality of ground mount solar racking systems also shows up differently at scale. On a small array, a slightly over-built system costs a little more. On a large one, the same choice multiplies across hundreds of posts and foundations, so getting the specification exactly right, strong enough for the wind zone but not needlessly over-engineered, has a real bottom-line effect. For how that plays out in dollar terms, see our guide to ground mount solar cost for installers.<\/p>\n\n\n\n<h2 class=\"wp-block-heading\"><strong>Questions to ask any supplier before you quote a high-wind site<\/strong><\/h2>\n\n\n\n<p class=\"wp-block-paragraph\">If you take one practical thing from this guide, make it this list. Put these questions to any supplier before you put their system on a high-wind quote.<\/p>\n\n\n\n<ul class=\"wp-block-list\">\n<li>Can you provide engineering certification for my site&#8217;s specific wind zone and terrain category under AS\/NZS 1170.2?<\/li>\n\n\n\n<li>Can you provide seismic design documentation under NZS 1170.5 for my site&#8217;s seismic classification?<\/li>\n\n\n\n<li>For an exposed Very High or Extra High site, can you provide site-specific certification signed by a registered engineer?<\/li>\n\n\n\n<li>What grade of steel and what coating do the structural members use, and how do they perform at cut edges in coastal conditions?<\/li>\n\n\n\n<li>What grade are the fasteners, and are they rated for coastal use?<\/li>\n\n\n\n<li>Does the system support both ground screw and concrete ballast foundations?<\/li>\n\n\n\n<li>What tilt range does the system offer, so I can reduce wind load on exposed sites?<\/li>\n<\/ul>\n\n\n\n<p class=\"wp-block-paragraph\">A supplier who can answer all of these with documentation, not assurances, is offering a system worth quoting. One who can&#8217;t is asking you to carry the risk.<\/p>\n\n\n\n<figure class=\"wp-block-image size-large\"><img decoding=\"async\" src=\"https:\/\/novamounting.com\/au\/wp-content\/uploads\/sites\/3\/2026\/10\/Questions-to-ask-any-supplier-before-you-quote-a-high-wind-site-1024x517.png\" alt=\"\"\/><\/figure>\n\n\n\n<p class=\"wp-block-paragraph\"><strong>Nova&#8217;s field notes: &#8220;wind rated&#8221; on a brochure is not certification<\/strong><\/p>\n\n\n\n<p class=\"wp-block-paragraph\">The phrase we&#8217;d most want installers to be sceptical of is &#8220;wind rated&#8221; printed on a product brochure with nothing behind it. A genuine system for an exposed New Zealand site comes with engineering documentation for the specific conditions: wind zone, terrain category, seismic site classification, and a registered engineer&#8217;s sign-off. A marketing claim is not a substitute, and in our experience it&#8217;s exactly the gap that surfaces after a wind or seismic event, when the council or the insurer asks for the certification that was never produced.<\/p>\n\n\n\n<p class=\"wp-block-paragraph\">When you&#8217;re comparing systems for an exposed or seismically active site, ask for the documentation up front and treat its absence as a disqualifier. The supplier who hands it over without fuss is the one who built for the conditions. The one who talks around it is hoping you won&#8217;t ask twice.<\/p>\n\n\n\n<h2 class=\"wp-block-heading\"><strong>Build wind-ready ground mount projects with Nova<\/strong><\/h2>\n\n\n\n<p class=\"wp-block-paragraph\">At Nova, we&#8217;ve spent more than 15 years designing solar mounting systems that hold up in real New Zealand conditions, including the exposed coastal and seismic sites where the margin for error is smallest. The Nova Ground Mount System is built around our &#8220;less is more&#8221; philosophy: fewer components, greater engineering spans, single-bolt rail clamps, module clamps with integrated earthing pins, and a rear brace support engineered to transfer wind uplift into the foundations. It comes in Zinc Aluminium Magnesium coated steel for corrosion resistance that protects structural strength, supports both ground screw and concrete ballast foundations, and offers adjustable tilt from 10\u00b0 to 30\u00b0 to manage wind load. It&#8217;s snow load rated, structural stability tested, corrosion resistance tested, backed by a 25-year warranty, and supported by a technical team that provides the wind-zone and seismic documentation your project needs.<\/p>\n\n\n\n<p class=\"wp-block-paragraph\">Whether you&#8217;re quoting a sheltered inland array or an exposed coastal project in the Wellington region, <a href=\"https:\/\/novamounting.com\/nz\/contact\/\">speak to the Nova technical team<\/a> for wind-zone-specific engineering support, or explore the <a href=\"https:\/\/novamounting.com\/nz\/mounting-systems\/ground\/\">NOVA Ground Mount System specifications<\/a> in detail.<\/p>\n\n\n\n<figure class=\"wp-block-image size-large\"><img decoding=\"async\" src=\"https:\/\/novamounting.com\/au\/wp-content\/uploads\/sites\/3\/2026\/10\/Build-wind-ready-ground-mount-projects-with-Nova-1024x517.png\" alt=\"\"\/><\/figure>\n\n\n\n<h2 class=\"wp-block-heading\"><strong>Frequently asked questions<\/strong><\/h2>\n\n\n\n<h3 class=\"wp-block-heading\"><strong>What makes a ground mount solar system suitable for New Zealand&#8217;s high wind regions?<\/strong><\/h3>\n\n\n\n<p class=\"wp-block-paragraph\">Three things, in order: certification for the site&#8217;s specific wind zone under AS\/NZS 1170.2 and seismic classification under NZS 1170.5, structural material and fasteners that keep their strength in the local environment (which on coastal sites means corrosion-resistant steel and grade 316 fasteners), and a foundation matched to the soil to resist wind uplift. A system that satisfies all three, with documentation to prove it, is suitable. A generic &#8220;wind resistant&#8221; claim is not enough.<\/p>\n\n\n\n<h3 class=\"wp-block-heading\"><strong>Is steel or aluminium better for a high-wind ground mount?<\/strong><\/h3>\n\n\n\n<p class=\"wp-block-paragraph\">For ground mount in high-wind conditions, steel is generally preferred because its higher stiffness allows longer spans and fewer posts under heavy wind load, which also lowers foundation cost. Aluminium is lighter and naturally corrosion-resistant but needs larger sections for the same span. The key in high wind is that whichever material is used, it must be specified for both the structural load and the site&#8217;s corrosion environment, since corrosion erodes the strength the structure needs to resist wind.<\/p>\n\n\n\n<h3 class=\"wp-block-heading\"><strong>Do I need seismic certification as well as wind certification in New Zealand?<\/strong><\/h3>\n\n\n\n<p class=\"wp-block-paragraph\">Yes. Unlike most of Australia, all New Zealand sites require seismic design under NZS 1170.5 alongside wind design under AS\/NZS 1170.2. Trackers and poorly connected structures handle seismic loads badly, so the racking must be certified for both. Always confirm the supplier can provide both wind-zone and seismic documentation for your exact site before quoting.<\/p>\n\n\n\n<h3 class=\"wp-block-heading\"><strong>Does a lower tilt angle make a ground mount more wind-resistant?<\/strong><\/h3>\n\n\n\n<p class=\"wp-block-paragraph\">Generally yes. A steeper tilt presents more surface to the wind and generates more uplift, while a lower tilt reduces the wind load on the structure. On high-wind sites, choosing a lower tilt within the system&#8217;s range can meaningfully reduce structural demand, usually at a small cost to annual yield. An adjustable system lets the installer make that trade-off deliberately for each site.<\/p>\n\n\n\n<h3 class=\"wp-block-heading\"><strong>What is the best ground mount solar system for coastal New Zealand sites?<\/strong><\/h3>\n\n\n\n<p class=\"wp-block-paragraph\">The best system for a coastal New Zealand site is one certified for the site&#8217;s wind zone and seismic classification that also resists marine corrosion, because on the coast wind and corrosion attack the structure together. That means corrosion-resistant coated steel (such as ZAM), grade 316 stainless fasteners, a foundation matched to the soil, and full engineering documentation for the site. The Nova Ground Mount System is built to meet these requirements, with ZAM-coated steel, foundation flexibility, adjustable tilt, and wind-zone and seismic engineering support.<\/p>\n","protected":false},"excerpt":{"rendered":"<p>The best solar ground mount system for a high wind region isn&#8217;t the one with the longest feature list or the lowest price. It&#8217;s the one that can prove, with engineering documentation, that it will stand up to the specific wind and seismic loads of your site. In much of New Zealand, where exposed coastal [&hellip;]<\/p>\n","protected":false},"author":2,"featured_media":1726,"comment_status":"closed","ping_status":"open","sticky":false,"template":"","format":"standard","meta":{"_acf_changed":false,"footnotes":""},"categories":[1],"tags":[],"class_list":["post-1725","post","type-post","status-publish","format-standard","has-post-thumbnail","hentry","category-tips-guide"],"acf":[],"yoast_head":"<!-- This site is optimized with the Yoast SEO plugin v28.7 - https:\/\/yoast.com\/product\/yoast-seo-wordpress\/ -->\n<title>Best ground mount solar systems for high wind regions - Nova Mounting NZ<\/title>\n<meta name=\"description\" content=\"How to choose the best ground mount solar system for high wind regions: the specs, certification, and materials that separate a wind-ready system from the rest.\" \/>\n<meta name=\"robots\" content=\"index, follow, max-snippet:-1, max-image-preview:large, max-video-preview:-1\" \/>\n<link rel=\"canonical\" href=\"https:\/\/novamounting.com\/nz\/blog\/best-ground-mount-solar-systems-high-wind-regions\/\" \/>\n<meta property=\"og:locale\" content=\"en_US\" \/>\n<meta property=\"og:type\" content=\"article\" \/>\n<meta property=\"og:title\" content=\"Best ground mount solar systems for high wind regions - Nova Mounting NZ\" \/>\n<meta property=\"og:description\" content=\"How to choose the best ground mount solar system for high wind regions: the specs, certification, and materials that separate a wind-ready system from the rest.\" \/>\n<meta property=\"og:url\" content=\"https:\/\/novamounting.com\/nz\/blog\/best-ground-mount-solar-systems-high-wind-regions\/\" \/>\n<meta property=\"og:site_name\" content=\"Nova Mounting NZ\" \/>\n<meta property=\"article:published_time\" content=\"2026-10-18T17:11:13+00:00\" \/>\n<meta property=\"article:modified_time\" content=\"2026-10-18T17:17:52+00:00\" \/>\n<meta property=\"og:image\" content=\"https:\/\/novamounting.com\/nz\/wp-content\/uploads\/sites\/4\/2026\/10\/Best-ground-mount-solar-systems-for-high-wind-regions-an-installers-selection-guide.png\" \/>\n\t<meta property=\"og:image:width\" content=\"1030\" \/>\n\t<meta property=\"og:image:height\" content=\"495\" \/>\n\t<meta property=\"og:image:type\" content=\"image\/png\" \/>\n<meta name=\"author\" content=\"Ronnie Fok\" \/>\n<meta name=\"twitter:card\" content=\"summary_large_image\" \/>\n<meta name=\"twitter:label1\" content=\"Written by\" \/>\n\t<meta name=\"twitter:data1\" content=\"Ronnie Fok\" \/>\n\t<meta name=\"twitter:label2\" content=\"Est. reading time\" \/>\n\t<meta name=\"twitter:data2\" content=\"14 minutes\" \/>\n<script type=\"application\/ld+json\" class=\"yoast-schema-graph\">{\"@context\":\"https:\\\/\\\/schema.org\",\"@graph\":[{\"@type\":\"Article\",\"@id\":\"https:\\\/\\\/novamounting.com\\\/nz\\\/blog\\\/best-ground-mount-solar-systems-high-wind-regions\\\/#article\",\"isPartOf\":{\"@id\":\"https:\\\/\\\/novamounting.com\\\/nz\\\/blog\\\/best-ground-mount-solar-systems-high-wind-regions\\\/\"},\"author\":{\"name\":\"Ronnie Fok\",\"@id\":\"https:\\\/\\\/novamounting.com\\\/nz\\\/#\\\/schema\\\/person\\\/07b2785987902cecc5e8c400b3676b79\"},\"headline\":\"Best ground mount solar systems for high wind regions: an installer&#8217;s selection guide\",\"datePublished\":\"2026-10-18T17:11:13+00:00\",\"dateModified\":\"2026-10-18T17:17:52+00:00\",\"mainEntityOfPage\":{\"@id\":\"https:\\\/\\\/novamounting.com\\\/nz\\\/blog\\\/best-ground-mount-solar-systems-high-wind-regions\\\/\"},\"wordCount\":2681,\"publisher\":{\"@id\":\"https:\\\/\\\/novamounting.com\\\/nz\\\/#organization\"},\"image\":{\"@id\":\"https:\\\/\\\/novamounting.com\\\/nz\\\/blog\\\/best-ground-mount-solar-systems-high-wind-regions\\\/#primaryimage\"},\"thumbnailUrl\":\"https:\\\/\\\/novamounting.com\\\/nz\\\/wp-content\\\/uploads\\\/sites\\\/4\\\/2026\\\/10\\\/Best-ground-mount-solar-systems-for-high-wind-regions-an-installers-selection-guide.png\",\"articleSection\":[\"Tips and Guide\"],\"inLanguage\":\"en-NZ\"},{\"@type\":\"WebPage\",\"@id\":\"https:\\\/\\\/novamounting.com\\\/nz\\\/blog\\\/best-ground-mount-solar-systems-high-wind-regions\\\/\",\"url\":\"https:\\\/\\\/novamounting.com\\\/nz\\\/blog\\\/best-ground-mount-solar-systems-high-wind-regions\\\/\",\"name\":\"Best ground mount solar systems for high wind regions - Nova Mounting NZ\",\"isPartOf\":{\"@id\":\"https:\\\/\\\/novamounting.com\\\/nz\\\/#website\"},\"primaryImageOfPage\":{\"@id\":\"https:\\\/\\\/novamounting.com\\\/nz\\\/blog\\\/best-ground-mount-solar-systems-high-wind-regions\\\/#primaryimage\"},\"image\":{\"@id\":\"https:\\\/\\\/novamounting.com\\\/nz\\\/blog\\\/best-ground-mount-solar-systems-high-wind-regions\\\/#primaryimage\"},\"thumbnailUrl\":\"https:\\\/\\\/novamounting.com\\\/nz\\\/wp-content\\\/uploads\\\/sites\\\/4\\\/2026\\\/10\\\/Best-ground-mount-solar-systems-for-high-wind-regions-an-installers-selection-guide.png\",\"datePublished\":\"2026-10-18T17:11:13+00:00\",\"dateModified\":\"2026-10-18T17:17:52+00:00\",\"description\":\"How to choose the best ground mount solar system for high wind regions: the specs, certification, and materials that separate a wind-ready system from the rest.\",\"breadcrumb\":{\"@id\":\"https:\\\/\\\/novamounting.com\\\/nz\\\/blog\\\/best-ground-mount-solar-systems-high-wind-regions\\\/#breadcrumb\"},\"inLanguage\":\"en-NZ\",\"potentialAction\":[{\"@type\":\"ReadAction\",\"target\":[\"https:\\\/\\\/novamounting.com\\\/nz\\\/blog\\\/best-ground-mount-solar-systems-high-wind-regions\\\/\"]}]},{\"@type\":\"ImageObject\",\"inLanguage\":\"en-NZ\",\"@id\":\"https:\\\/\\\/novamounting.com\\\/nz\\\/blog\\\/best-ground-mount-solar-systems-high-wind-regions\\\/#primaryimage\",\"url\":\"https:\\\/\\\/novamounting.com\\\/nz\\\/wp-content\\\/uploads\\\/sites\\\/4\\\/2026\\\/10\\\/Best-ground-mount-solar-systems-for-high-wind-regions-an-installers-selection-guide.png\",\"contentUrl\":\"https:\\\/\\\/novamounting.com\\\/nz\\\/wp-content\\\/uploads\\\/sites\\\/4\\\/2026\\\/10\\\/Best-ground-mount-solar-systems-for-high-wind-regions-an-installers-selection-guide.png\",\"width\":1030,\"height\":495},{\"@type\":\"BreadcrumbList\",\"@id\":\"https:\\\/\\\/novamounting.com\\\/nz\\\/blog\\\/best-ground-mount-solar-systems-high-wind-regions\\\/#breadcrumb\",\"itemListElement\":[{\"@type\":\"ListItem\",\"position\":1,\"name\":\"Home\",\"item\":\"https:\\\/\\\/novamounting.com\\\/nz\\\/\"},{\"@type\":\"ListItem\",\"position\":2,\"name\":\"Tips and Guide\",\"item\":\"https:\\\/\\\/novamounting.com\\\/nz\\\/blog\\\/category\\\/tips-guide\\\/\"},{\"@type\":\"ListItem\",\"position\":3,\"name\":\"Best ground mount solar systems for high wind regions: an installer&#8217;s selection guide\"}]},{\"@type\":\"WebSite\",\"@id\":\"https:\\\/\\\/novamounting.com\\\/nz\\\/#website\",\"url\":\"https:\\\/\\\/novamounting.com\\\/nz\\\/\",\"name\":\"Nova Mounting NZ\",\"description\":\"\",\"publisher\":{\"@id\":\"https:\\\/\\\/novamounting.com\\\/nz\\\/#organization\"},\"potentialAction\":[{\"@type\":\"SearchAction\",\"target\":{\"@type\":\"EntryPoint\",\"urlTemplate\":\"https:\\\/\\\/novamounting.com\\\/nz\\\/?s={search_term_string}\"},\"query-input\":{\"@type\":\"PropertyValueSpecification\",\"valueRequired\":true,\"valueName\":\"search_term_string\"}}],\"inLanguage\":\"en-NZ\"},{\"@type\":\"Organization\",\"@id\":\"https:\\\/\\\/novamounting.com\\\/nz\\\/#organization\",\"name\":\"Nova Mounting NZ\",\"url\":\"https:\\\/\\\/novamounting.com\\\/nz\\\/\",\"logo\":{\"@type\":\"ImageObject\",\"inLanguage\":\"en-NZ\",\"@id\":\"https:\\\/\\\/novamounting.com\\\/nz\\\/#\\\/schema\\\/logo\\\/image\\\/\",\"url\":\"https:\\\/\\\/novamounting.com\\\/nz\\\/wp-content\\\/uploads\\\/sites\\\/4\\\/2024\\\/05\\\/Nova.png\",\"contentUrl\":\"https:\\\/\\\/novamounting.com\\\/nz\\\/wp-content\\\/uploads\\\/sites\\\/4\\\/2024\\\/05\\\/Nova.png\",\"width\":165,\"height\":43,\"caption\":\"Nova Mounting NZ\"},\"image\":{\"@id\":\"https:\\\/\\\/novamounting.com\\\/nz\\\/#\\\/schema\\\/logo\\\/image\\\/\"}},{\"@type\":\"Person\",\"@id\":\"https:\\\/\\\/novamounting.com\\\/nz\\\/#\\\/schema\\\/person\\\/07b2785987902cecc5e8c400b3676b79\",\"name\":\"Ronnie Fok\",\"image\":{\"@type\":\"ImageObject\",\"inLanguage\":\"en-NZ\",\"@id\":\"https:\\\/\\\/secure.gravatar.com\\\/avatar\\\/2ac2653f07f729d7774ef7149255baebf93e49daf8649abe40bb4d3a9d69b5cc?s=96&d=mm&r=g\",\"url\":\"https:\\\/\\\/secure.gravatar.com\\\/avatar\\\/2ac2653f07f729d7774ef7149255baebf93e49daf8649abe40bb4d3a9d69b5cc?s=96&d=mm&r=g\",\"contentUrl\":\"https:\\\/\\\/secure.gravatar.com\\\/avatar\\\/2ac2653f07f729d7774ef7149255baebf93e49daf8649abe40bb4d3a9d69b5cc?s=96&d=mm&r=g\",\"caption\":\"Ronnie Fok\"},\"url\":\"https:\\\/\\\/novamounting.com\\\/nz\\\/blog\\\/author\\\/thenovacomau\\\/\"}]}<\/script>\n<!-- \/ Yoast SEO plugin. -->","yoast_head_json":{"title":"Best ground mount solar systems for high wind regions - Nova Mounting NZ","description":"How to choose the best ground mount solar system for high wind regions: the specs, certification, and materials that separate a wind-ready system from the rest.","robots":{"index":"index","follow":"follow","max-snippet":"max-snippet:-1","max-image-preview":"max-image-preview:large","max-video-preview":"max-video-preview:-1"},"canonical":"https:\/\/novamounting.com\/nz\/blog\/best-ground-mount-solar-systems-high-wind-regions\/","og_locale":"en_US","og_type":"article","og_title":"Best ground mount solar systems for high wind regions - Nova Mounting NZ","og_description":"How to choose the best ground mount solar system for high wind regions: the specs, certification, and materials that separate a wind-ready system from the rest.","og_url":"https:\/\/novamounting.com\/nz\/blog\/best-ground-mount-solar-systems-high-wind-regions\/","og_site_name":"Nova Mounting NZ","article_published_time":"2026-10-18T17:11:13+00:00","article_modified_time":"2026-10-18T17:17:52+00:00","og_image":[{"width":1030,"height":495,"url":"https:\/\/novamounting.com\/nz\/wp-content\/uploads\/sites\/4\/2026\/10\/Best-ground-mount-solar-systems-for-high-wind-regions-an-installers-selection-guide.png","type":"image\/png"}],"author":"Ronnie Fok","twitter_card":"summary_large_image","twitter_misc":{"Written by":"Ronnie Fok","Est. reading time":"14 minutes"},"schema":{"@context":"https:\/\/schema.org","@graph":[{"@type":"Article","@id":"https:\/\/novamounting.com\/nz\/blog\/best-ground-mount-solar-systems-high-wind-regions\/#article","isPartOf":{"@id":"https:\/\/novamounting.com\/nz\/blog\/best-ground-mount-solar-systems-high-wind-regions\/"},"author":{"name":"Ronnie Fok","@id":"https:\/\/novamounting.com\/nz\/#\/schema\/person\/07b2785987902cecc5e8c400b3676b79"},"headline":"Best ground mount solar systems for high wind regions: an installer&#8217;s selection guide","datePublished":"2026-10-18T17:11:13+00:00","dateModified":"2026-10-18T17:17:52+00:00","mainEntityOfPage":{"@id":"https:\/\/novamounting.com\/nz\/blog\/best-ground-mount-solar-systems-high-wind-regions\/"},"wordCount":2681,"publisher":{"@id":"https:\/\/novamounting.com\/nz\/#organization"},"image":{"@id":"https:\/\/novamounting.com\/nz\/blog\/best-ground-mount-solar-systems-high-wind-regions\/#primaryimage"},"thumbnailUrl":"https:\/\/novamounting.com\/nz\/wp-content\/uploads\/sites\/4\/2026\/10\/Best-ground-mount-solar-systems-for-high-wind-regions-an-installers-selection-guide.png","articleSection":["Tips and Guide"],"inLanguage":"en-NZ"},{"@type":"WebPage","@id":"https:\/\/novamounting.com\/nz\/blog\/best-ground-mount-solar-systems-high-wind-regions\/","url":"https:\/\/novamounting.com\/nz\/blog\/best-ground-mount-solar-systems-high-wind-regions\/","name":"Best ground mount solar systems for high wind regions - Nova Mounting NZ","isPartOf":{"@id":"https:\/\/novamounting.com\/nz\/#website"},"primaryImageOfPage":{"@id":"https:\/\/novamounting.com\/nz\/blog\/best-ground-mount-solar-systems-high-wind-regions\/#primaryimage"},"image":{"@id":"https:\/\/novamounting.com\/nz\/blog\/best-ground-mount-solar-systems-high-wind-regions\/#primaryimage"},"thumbnailUrl":"https:\/\/novamounting.com\/nz\/wp-content\/uploads\/sites\/4\/2026\/10\/Best-ground-mount-solar-systems-for-high-wind-regions-an-installers-selection-guide.png","datePublished":"2026-10-18T17:11:13+00:00","dateModified":"2026-10-18T17:17:52+00:00","description":"How to choose the best ground mount solar system for high wind regions: the specs, certification, and materials that separate a wind-ready system from the rest.","breadcrumb":{"@id":"https:\/\/novamounting.com\/nz\/blog\/best-ground-mount-solar-systems-high-wind-regions\/#breadcrumb"},"inLanguage":"en-NZ","potentialAction":[{"@type":"ReadAction","target":["https:\/\/novamounting.com\/nz\/blog\/best-ground-mount-solar-systems-high-wind-regions\/"]}]},{"@type":"ImageObject","inLanguage":"en-NZ","@id":"https:\/\/novamounting.com\/nz\/blog\/best-ground-mount-solar-systems-high-wind-regions\/#primaryimage","url":"https:\/\/novamounting.com\/nz\/wp-content\/uploads\/sites\/4\/2026\/10\/Best-ground-mount-solar-systems-for-high-wind-regions-an-installers-selection-guide.png","contentUrl":"https:\/\/novamounting.com\/nz\/wp-content\/uploads\/sites\/4\/2026\/10\/Best-ground-mount-solar-systems-for-high-wind-regions-an-installers-selection-guide.png","width":1030,"height":495},{"@type":"BreadcrumbList","@id":"https:\/\/novamounting.com\/nz\/blog\/best-ground-mount-solar-systems-high-wind-regions\/#breadcrumb","itemListElement":[{"@type":"ListItem","position":1,"name":"Home","item":"https:\/\/novamounting.com\/nz\/"},{"@type":"ListItem","position":2,"name":"Tips and Guide","item":"https:\/\/novamounting.com\/nz\/blog\/category\/tips-guide\/"},{"@type":"ListItem","position":3,"name":"Best ground mount solar systems for high wind regions: an installer&#8217;s selection guide"}]},{"@type":"WebSite","@id":"https:\/\/novamounting.com\/nz\/#website","url":"https:\/\/novamounting.com\/nz\/","name":"Nova Mounting NZ","description":"","publisher":{"@id":"https:\/\/novamounting.com\/nz\/#organization"},"potentialAction":[{"@type":"SearchAction","target":{"@type":"EntryPoint","urlTemplate":"https:\/\/novamounting.com\/nz\/?s={search_term_string}"},"query-input":{"@type":"PropertyValueSpecification","valueRequired":true,"valueName":"search_term_string"}}],"inLanguage":"en-NZ"},{"@type":"Organization","@id":"https:\/\/novamounting.com\/nz\/#organization","name":"Nova Mounting NZ","url":"https:\/\/novamounting.com\/nz\/","logo":{"@type":"ImageObject","inLanguage":"en-NZ","@id":"https:\/\/novamounting.com\/nz\/#\/schema\/logo\/image\/","url":"https:\/\/novamounting.com\/nz\/wp-content\/uploads\/sites\/4\/2024\/05\/Nova.png","contentUrl":"https:\/\/novamounting.com\/nz\/wp-content\/uploads\/sites\/4\/2024\/05\/Nova.png","width":165,"height":43,"caption":"Nova Mounting NZ"},"image":{"@id":"https:\/\/novamounting.com\/nz\/#\/schema\/logo\/image\/"}},{"@type":"Person","@id":"https:\/\/novamounting.com\/nz\/#\/schema\/person\/07b2785987902cecc5e8c400b3676b79","name":"Ronnie Fok","image":{"@type":"ImageObject","inLanguage":"en-NZ","@id":"https:\/\/secure.gravatar.com\/avatar\/2ac2653f07f729d7774ef7149255baebf93e49daf8649abe40bb4d3a9d69b5cc?s=96&d=mm&r=g","url":"https:\/\/secure.gravatar.com\/avatar\/2ac2653f07f729d7774ef7149255baebf93e49daf8649abe40bb4d3a9d69b5cc?s=96&d=mm&r=g","contentUrl":"https:\/\/secure.gravatar.com\/avatar\/2ac2653f07f729d7774ef7149255baebf93e49daf8649abe40bb4d3a9d69b5cc?s=96&d=mm&r=g","caption":"Ronnie Fok"},"url":"https:\/\/novamounting.com\/nz\/blog\/author\/thenovacomau\/"}]}},"_links":{"self":[{"href":"https:\/\/novamounting.com\/nz\/wp-json\/wp\/v2\/posts\/1725","targetHints":{"allow":["GET"]}}],"collection":[{"href":"https:\/\/novamounting.com\/nz\/wp-json\/wp\/v2\/posts"}],"about":[{"href":"https:\/\/novamounting.com\/nz\/wp-json\/wp\/v2\/types\/post"}],"author":[{"embeddable":true,"href":"https:\/\/novamounting.com\/nz\/wp-json\/wp\/v2\/users\/2"}],"replies":[{"embeddable":true,"href":"https:\/\/novamounting.com\/nz\/wp-json\/wp\/v2\/comments?post=1725"}],"version-history":[{"count":1,"href":"https:\/\/novamounting.com\/nz\/wp-json\/wp\/v2\/posts\/1725\/revisions"}],"predecessor-version":[{"id":1728,"href":"https:\/\/novamounting.com\/nz\/wp-json\/wp\/v2\/posts\/1725\/revisions\/1728"}],"wp:featuredmedia":[{"embeddable":true,"href":"https:\/\/novamounting.com\/nz\/wp-json\/wp\/v2\/media\/1726"}],"wp:attachment":[{"href":"https:\/\/novamounting.com\/nz\/wp-json\/wp\/v2\/media?parent=1725"}],"wp:term":[{"taxonomy":"category","embeddable":true,"href":"https:\/\/novamounting.com\/nz\/wp-json\/wp\/v2\/categories?post=1725"},{"taxonomy":"post_tag","embeddable":true,"href":"https:\/\/novamounting.com\/nz\/wp-json\/wp\/v2\/tags?post=1725"}],"curies":[{"name":"wp","href":"https:\/\/api.w.org\/{rel}","templated":true}]}}